|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Tendon Static SPEC40 10.0 STD Static Rope
The Tendon Static SPEC40 10.0 STD is a strong type A static rope for work at height and over a drop: rescue work, caving and similar activities. Low elongation and high static strength are all you want from a rope that should do its job quietly. The rope is sold by the metre, cut to order, so you take the number of metres you need and not a coil just in case.
The diameter is 10 mm, the material is polyamide, the weight of one metre is 69 g, the breaking strength is 31 kN and the static elongation is 3.4%. For type A, the minimum strength under EN 1891 is 22 kN. The rope also has CE 1019 certification. Standard impregnation protects it from water and abrasion, and Secure technology stops the sheath from slipping, so the rope stays safe even with a badly damaged sheath. At the ends, over the last 15 mm, the core and the sheath are joined into one, and a control tape with data about the manufacturer runs inside. An unused rope can be stored for up to 5 years, then used for up to 10 years. It must be inspected at least once a year.
Features
- Type A static rope with a diameter of 10 mm for work at height and over a drop
- Material: polyamide (PA)
- Breaking strength of 31 kN, static elongation of 3.4%
- Weight of one metre: 69 g
- Standard impregnation: protection from water and abrasion
- Secure technology: zero sheath slippage
- Compact ends: the core and the sheath are joined over the last 15 mm
- Control tape with data about the manufacturer, the standard and the year of production
- Certification EN 1891, CE 1019; sold by the metre, from 1 m
Who it is for
The rope is for rescuers, cavers and everyone who works at height and wants to buy static rope cut to the exact length. If you need a thicker and stronger rope, look at the Tendon Static SPEC 40 11.0 STD.