|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Tendon Static SPEC 40 11.0 STD Static Rope
The Tendon Static SPEC 40 11.0 STD is a strong static rope with a diameter of 11 mm for intensive use in hard conditions. The thicker the rope, the higher its strength, and here it works literally: the breaking strength is 33 kN with low elongation. The rope is sold by the metre, cut to order, so you take as much as you need and no spare coil stays in the garage.
Standard impregnation protects the rope from water and abrasion and noticeably extends its life. Secure technology uses a multi-layer construction of braided layers and specially treated fibres. It gives zero sheath slippage, so the rope stays safe even with a badly damaged sheath. The rope ends are compact, and along the whole length inside runs a control tape with data about the manufacturer, the rope type, the standard and the year of production. The weight of one metre is 80 g, the static elongation is 3.4% and the certification is CE 1019.
Features
- Static rope with a diameter of 11 mm for work at height
- Breaking strength of 33 kN, static elongation of 3.4%
- Weight of one metre: 80 g
- Standard impregnation: protection from water and abrasion
- Secure technology: zero sheath slippage, safe even with a badly damaged sheath
- Compact ends: the core and the sheath are joined into one
- Control tape inside along the whole length
- Certification CE 1019
- Sold by the metre, from 1 m
Who it is for
The rope is for people who need the strongest and most wear-resistant static rope in the Tendon range for work at height, sold cut to length. If a thinner and lighter rope is enough, look at the Tendon Static SPEC40 10.0 STD.