|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Camp Turbolock Progress Capture Pulley
The Camp Turbolock is an aluminium pulley with a ball bearing for ropes 8–13 mm in diameter. In the catalogue it is listed as a progress capture pulley. The manufacturer intends it for rope access, tree care, team rescue and self-rescue. A pulley has one job: to make the rope move with less fuss. This one does it quietly and does not ask for thanks.
The body is made of aluminium alloy and the sheave runs on a ball bearing. The sheave diameter is 41 mm and the weight is 198 g. Breaking strength is 23 kN. The working load limit is given as 2.5 kN x 2 = 5 kN. Breaking strength and working load are stated separately and do not replace each other. The pulley meets EN 12278, EN 567 and EN 12841/B. Choose it with the rope diameter, the allowed working load and the way it joins the system in mind, and use it as the CAMP instructions say. Check these figures against the other parts of your set before the first use.
Features
- Aluminium alloy body with a ball bearing
- Sheave diameter 41 mm
- For ropes 8–13 mm in diameter
- Breaking strength 23 kN
- Working load limit 2.5 kN x 2 = 5 kN, stated separately from breaking strength
- Standards: EN 12278, EN 567, EN 12841/B
- Weight 198 g
- Uses: rope access, tree care, team rescue, self-rescue
Who it is for
For people who work with 8–13 mm ropes in rope access, tree care or rescue teams and want a pulley confirmed by several standards. Check the rope diameter and the loads before you choose. If you only need a large pulley for ropes up to 16 mm, look at the Camp Naiad Pro. On a day when the rope runs smoothly, nobody thanks the pulley, and that suits it perfectly.