|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
CAMP SPHINX Pulley
CAMP SPHINX is a compact pulley for rope systems. The sheave diameter is 28 mm, the breaking strength is 24 kN, the working load limit is 2 kN x 2 = 4 kN, and the maximum rope diameter is 13 mm. The pulley is light, only 95 g, and it does not draw attention to itself.
The body is made of aluminium alloy, and the rotation is provided by a brass bushing instead of a bearing. The weight is 95 g, and the model meets EN 12278. Breaking strength and working load limit are listed separately and do not replace each other. According to the manufacturer, the intended use is self-rescue. The model is chosen with the parameters of the whole set in mind, and it is installed and used according to the CAMP instructions. When choosing a pulley, consider the rope diameter, the working load limit and the way the device is included in the system, so the parameters from the card should be checked in advance against the other elements of the set.
Features
- Meets EN 12278
- Aluminium alloy body
- Brass bushing instead of a bearing
- Breaking strength 24 kN
- Working load limit 2 kN x 2 = 4 kN
- Maximum rope diameter 13 mm, sheave diameter 28 mm
- Intended for self-rescue
- Weight 95 g
Who it is for
For people who build a light self-rescue kit and prefer equipment that stays quiet and inconspicuous. Check the rope diameter and the loads before choosing. If you need a pulley with a ball bearing for ropes up to 16 mm, look at the NAIAD PRO. A pulley of 95 g is easy to forget in the kit, and that is meant as a compliment.