|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Tendon Reep Accessory Cord
The Tendon Reep is an auxiliary cord made by the Czech company LANEX, which has been braiding ropes in the Czech Republic under the Tendon brand for twenty years. The cord is sold in a full coil of 100 m. This is a stock for a climbing club, a section, a rope access school or a big expedition. One hundred metres is about what a club uses on prusiks in a season, if nobody counts who cut how much.
The cord is braided from polyamide. A strong sheath protects the core, and the cord stays soft and holds knots well. Diameters from 4 to 8 mm are certified to EN 564 / CE 1019, which is the standard for accessory cords in mountaineering and work at height. The thin 2 and 3 mm cords are general-purpose cords for tent guy lines, fixing gear, marking and small repairs. They are not for belaying. The minimum strength is 340 daN for 4 mm, 510 daN for 5 mm, 1000 daN for 6 mm, 1300 daN for 7 mm and 1460 daN for 8 mm.
Features
- Material: polyamide (PA), made in the Czech Republic
- 4 mm: minimum strength 340 daN
- 5 mm: minimum strength 510 daN
- 6 mm: minimum strength 1000 daN
- 7 mm: minimum strength 1300 daN
- 8 mm: minimum strength 1460 daN
- Cords of 4-8 mm comply with EN 564 / CE 1019
- 2 and 3 mm are general-purpose cords, not for belaying
- Coil of 100 m: you cut pieces of the length you need
Who it is for
The Reep is for climbing clubs and sections that need prusiks, slings and lanyards in quantity, for rope access workers and rescuers who set up anchors and do auxiliary tasks, and for arborists and hikers who prefer to keep their own stock of cord. For prusiks people usually take 5-7 mm, for anchors and slings 7-8 mm, and for household tasks 2-4 mm. Important: an accessory cord does not replace a main rope. For belaying, use Tendon dynamic and static ropes.