|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Climbing Technology PROGRIP PLUS
Climbing Technology PROGRIP PLUS are strong leather gloves for intensive and long work with a rope: belaying, descending, rescue operations and long shifts at height. They are the workhorse of the PROGRIP line. Where light gloves are already asking for mercy, these only start to enjoy the work. A double layer of natural leather is placed exactly where the rope rubs the most: on the palm and between the thumb and the index finger. The protection from mechanical risks is confirmed by the standard EN 388:2016+A1:2018.
The main material is goat leather (80%). It is strong, but it stays soft and lets you feel the rope, so your hands do not turn into wooden blocks. The back has elastic, breathable inserts with spandex. The hand bends easily, and the palm sweats less when there is a lot of work. The anatomical neoprene cuff holds the wrist firmly and adjusts with hook-and-loop tape, so dirt does not get inside and the glove does not hang loose. The cuff has a hole: you can clip the gloves to a harness with a carabiner, and you do not need to hold them in your teeth while your hands are busy. The weight of a pair depends on the size and is from 119 to 165 g. Choose the size by the width of the palm and the length from the hand to the wrist, using the manufacturer's size table.
Features
- Leather gloves for intensive and long work with a rope
- Double layer of natural leather on the palm and between the thumb and the index finger
- Elastic, breathable inserts on the back for mobility and ventilation
- Ergonomic neoprene cuff with hook-and-loop closure
- Hole in the cuff for attaching to a harness
- Composition: goat leather 80%, spandex 15%, neoprene 5%
- Conform to the standard EN 388:2016+A1:2018
- Weight of a pair from 119 to 165 g, depending on the size
Who it is for
Rope access workers, rescuers, instructors and everyone who works with a rope for many hours: belaying, descending and hauling loads. They are good where gloves wear out faster than you would like. If you need a lighter and thinner model for better feeling, look at the Climbing Technology PROGRIP.